Definition: It is a two component, reaction drying, epoxy resin based, solvent free, multi purpose transparent primer.

Qualities: It has good penetration and high adhesion strength that can be used under the coating of normal and highly absorbent concrete surfaces, preparation of epoxy based bedding mortars, marine applications, fiber wrapping works, epoxy varnishing works, under epoxy and polyurethane floor coatings.

SURFACE PREPARATION AND APPLICATION
New surfaces: Oil and dirt should be cleaned from the surface, the surface to be applied should be sanded and made suitable for painting.
Old painted surfaces: Loose swollen paints on the surface should be cleaned, level defects on the surface should be filled with epoxy paste and sanded. All free powders on the surface should be cleaned with the help of vacuum.
Application: After mixing component A and component B with the help of a mixer, wait 30 minutes before applying for pre-reaction. Surface temperature should be at least 10 ° C. No application should be made around the dew point of the water (in the range of 2-5 ° C).
Form of Application: Conventional type spray gun with air pressure 3-4 bar, nozzle diameter 1.4-1.6mm. And airless spray gun, roller and brush can be used in small areas.

Specifications
Colour: Transparent
Thinning: 5-10% epoxy thinner
Density (gr/cm³ ,20ºC): 1,10-15 gr./cm³
Coverage: 0,150-0,200 Kg./m²
Pot Life: ½ - 1 hours depending on the air temperature
Drying time: The touch drying time is 5 hours, the time required to apply another coat is at least 18 hours, and the chemical resistance time is 8 days.
Storage:  It is one (1) year in its unopened package under suitable storage conditions.
Packaging: 12+6=18 Kg. Fixed